|
|
|
|
| GT-WING |
| |
 |
| ith
the help of other shops, voltex has been producing new items, and for
quality of the product the staff has been working hard and with pride.
For installation on the wing, there is not much work needed since they
have specific application for each vehicle.Each pieces for width, material,
height, wing type is made by hand one at a time when ordered. We also
offer after service by providing wing cutting and fixing. We will also
take care of any claims. |
 |
| Angle
adjustment & extension bracket |
[ V mount & Center
mount] |
|
Front 6,
rear 5 steps can be used to adjust the wing from the endplate( made
by Dry-carbon).
And you can need more height with extension bracket 30mm for stock's
add 245&275mm.
But it is make a roll and so you would be care for drive.
|
 |
V mount concept
: Keeping under vehicle inspection guide, the shortness of wing will
stand out, so we connected the endplate to wing bracket to make the
wing look longer and to keep the GT Wing look.
Center mount concept : Keeping under vehicle inspection guide, the
width of wing will looks so shortness , so we have development to keep
good looking.(for example type7 has both type) |
| And
you would ask to your purchase shop that after service and claim.
And please taking care for this service ,If you bought by mail
order and e-commerce that you can not get it. |
|
| |
|
|
|
|
|
[ Type
1 & 2 ] |
[ Type 1 S
] |
 |
The
type 2 is the basic model for GT Wings. Known for the good balance it
is best for FR vehicles. From street to track, this wing can be made
from 1350mm to 1700mm. The type 1 is a low drag, and is a bit smaller
thantype 2 wing. For FF vehicle and light weight vehicle. |
 |
Type 1S is new
3D shape wing. It is not only having feature of GTwing, but also it
suits
the design of the latest car.
This S series is impressive wing in the street field. |
|
|
|
|
|
| [ Type
2Ｖ ] |
[ Type 3 ] |
 |
The
Voltex new version V mount is made to have that GT Wing look while being
able to drive on streets. The end plate was designed to look like a V. |
 |
Keeping the wing
to keep to pass the vehicle inspection, this wing will produce the most
downforce from the line up. With the new trend this wing has been noticable
from its double step. Best when ordered at 1400mm with a center mount.(need
to make holes). For center mount vehicles, please contact for assistance. |
| |
|
|
|
| [ Type
4 ] |
[ Type 5 ] |
 |
Made
for vehicles with square shaped trunks. The wing itself is thin type
and is made for low drag. For more downforce, please use the wing with
the Voltex garneyflap. This wing can be made up to 1900mm wide. |
 |
We made this
wing specially for vehicles that are square shaped such as NSX,34GTR,EVO.
The concept was to have a high speed down force and weight distribution
when driving at high speed.We use this wing mostly for time attack
edition Evos. |
| |
|
|
|
|
|
|
[  Type
5Ｖ ] |
[ Type 7 ＆7V ] |
 |
Keeping
a street drivable look and making the wing short, it tends to stand
out. So, at Voltex they combined the wing bracket and end plate to
have the wing look longer and keep the GT Wing style. We made this
wing to pass the vehicle inspection in Japan. |
 |
Keeping a street
drivable look and making the wing short, it tends to stand out. So,
at Voltex they combined the wing bracket and end plate to have the
wing look longer and keep the GT Wing style. We made this wing to pass
the vehicle inspection in Japan. |
| |
|
|
|
|
|
|
| [ Type Ｈ2 /
Ｈ2S ] |
[ Type
8 ] |
 |
This
wing is for old type small vehicles and hatch-back trunk. We have preparing
how to put on for any vehicles type such even request.( without Suzuki
SWIFT SPORTS) |
 |
This is brand
new item that special designed for center mount based and we think
this is good for FR vehicle. |
| |
It is no longer available |
|
|
|
|
|
|
|
|
| |
Copyright (c)
VOLTEX co., ltd All Rights Reserved.
|
| |
|
